cpu: implement JAL/JALR

cpu.go

@@ -53,11 +53,46 @@ func (c *CPUState) Step() error {
 
 	case 0b01101111:
 		// JAL
-		panic("todo")
+		// The jump and link (JAL) instruction uses the J-type format, where the J-immediate encodes a
+		// signed offset in multiples of 2 bytes. The offset is sign-extended and added to the address of the
+		// jump instruction to form the jump target address. Jumps can therefore target a ±1 MiB range.
+		// JAL stores the address of the instruction that follows the JAL (pc+4) into register rd. The standard
+		// software calling convention uses x1 as the return address register and x5 as an alternate link register.
+		// Plain unconditional jumps (assembler pseudoinstruction J) are encoded as a JAL with rd=x0.
+
+		var imm uint32 = (opcode >> 12) & 0b11111111111111111111
+		if imm&0b10000000000000000000 != 0 {
+			imm |= 0b11111111111100000000000000000000 // sign extension: if MSB is set in imm, extend with 1's instead of 0's
+		}
+
+		// 2^20 has ~1MiB unsigned range, but it's in multiples of two bytes
+		offset := int32(imm) * 2
+
+		c.Registers[opcode_rd(opcode)] = c.Pc + 4
+		c.Pc = uint32(int32(c.Pc) + offset)
+		return nil // Don't fallthrough, or else we increment Pc again
 
 	case 0b1100111:
 		// JALR
-		panic("todo")
+		funct3 := (opcode >> 12) & 0b111
+		if funct3 != 0b000 {
+			return ErrInvalidOpcode{}
+		}
+
+		// The indirect jump instruction JALR (jump and link register) uses the I-type encoding. The target
+		// address is obtained by adding the sign-extended 12-bit I-immediate to the register rs1, then setting
+		// the least-significant bit of the result to zero. The address of the instruction following the jump
+		// (pc+4) is written to register rd. Register x0 can be used as the destination if the result is not
+		// required.
+
+		var imm uint32 = (opcode >> 20) & 0b111111111111
+		if imm&0b100000000000 != 0 {
+			imm |= 0b11111111111111111111000000000000 // sign extension: if MSB is set in imm, extend with 1's instead of 0's
+		}
+
+		c.Registers[opcode_rd(opcode)] = c.Pc + 4
+		c.Pc = (c.Registers[opcode_rs1(opcode)] + imm) & 0b11111111111111111111111111111110
+		return nil // Don't fallthrough, or else we increment Pc again
 
 	case 0b1100011:
 		// BEQ/BNE/BLT/BGE/BLTU/BGEU
@@ -82,10 +117,13 @@ func (c *CPUState) Step() error {
 
 		switch funct3 {
 		case 0b000:
-			// ADDI
+			// ADDI/NOP
 			// ADDI adds the sign-extended 12-bit immediate to register rs1. Arithmetic overflow is ignored and
 			// the result is simply the low XLEN bits of the result. ADDI rd, rs1, 0 is used to implement the MV
 			// rd, rs1 assembler pseudoinstruction.
+			//
+			// The NOP instruction does not change any architecturally visible state, except for advancing the
+			// pc and incrementing any applicable performance counters. NOP is encoded as ADDI x0, x0, 0.
 			c.Registers[opcode_rd(opcode)] = c.ReadRegister(opcode_rs1(opcode)) + imm
 
 		case 0b010:
@@ -274,7 +312,7 @@ func (c *CPUState) Step() error {
 	}
 
 	// Step program-counter forward
-	c.Pc++
+	c.Pc += 4
 
 	return nil
 }